Schennor®™

                                                                           | Cenosphere | Products | Applications | Company | Contact |
     Not all cenospheres are alike. In fact, they can be quite different. The properties of cenospheres depend on the consistency of the coal used and the operating parameters of the power plant. As long as these two factors remain constant, the cenospheres will be very consistent.
Pycnometer

       Cenospheres have a particle size range of 10-600 micron. The most typical products we produce range 10-300, 10-150, and 300-600 micron respectively.

Digital Balance
     Equipped with both unique processing systems and the unique testing instrument, each of the following products is precisely processed with very accurate top cuts and particle distributions. Our goal is to provide cenosphere solutions for you the customer. Whatever the application, we are confident we can supply cenospheres that will meet your needs.
Sieves


                
       Product Line     
      
    

Product
Particle Size
(µ)
True Density (g/cc)
Bulk Density (g/cc)
Hardness (Moh Scale)
Color
(Hunter Index)
Melting Point
( °C)
SC-300
10-300
0.85 +/-3.0%
0.35-0.45
5-6
Light gray (45-55 )
1400
SC-500
10-500
0.85 +/-3.0%
0.35-0.45
5-6
Light gray (45-55)
1400
SH-150
10-150
0.80-0.85
0.40-0.45
5-6
Light gray (45-55)
1400
SH-500
10-500
0.81 +/- 3.0%
0.35-0.40
5-6
Light gray (45-55)
1400
SE-300
10-300
0.75 +/- 3.0%
0.35-0.45
5-6
Light gray (45-55)
1400

 

     SC SERIES:

                  Commonly used in building products as light filler. Cenospheres enhance products by reducing density,                   reducing resin demand, and increasing volume load capacity. This in turn will lead to a reduction in                   formulation costs.

     SH SERIES:

                  Excellent choice for use by service companies in the oilfield industry. In oilfield cementing applications,
                  SH series spheres decrease the slurry density without increasing the water content. This in turn provides                   better compressive strength to the cement.

     SE SERIES:

                 This series is an excellent choice when a lower specific gravity material is required. Commonly used in oilfield                  drilling services and building products as light filler. There are also many other applications such as refractory                  works, foundry, automobile parts, ceramic products, etc.

                 Material Safety Data Sheet (MSDS) Download (pdf)

     

      NOTE: The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. Therefore, NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED HEREIN. Further, we expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information.


Schennor®™ is a registered trademark of B&J Int'l Inc in the USA and other countries.


Copyright © B&J International Inc, USA. 2005-2007. All rights reserved.